Wet Step

• MATERIAL: High-density, closed-cell nitrile rubber foam
• THICKNESS: 6.35 mm
• FLAMMABILITY: Passes Flammability Standard CPSC-FF-1-70
• STATIC CONTROL: ASTM C1028-96 Static Coefficient of Friction: Dry: 0.99 Wet: 0.82
• COMPRESSION DEFELCTION: 41.8% at 20 psi, 53.5% at 40 psi

Recommended for use in wet areas where additional slip-resistance is needed – locker rooms, showers, and around pools and spas. Also recommended for use in medical settings such as operating rooms and scrub areas.

Wet Step mats can be cleaned in several different ways:

1. Commercially laundered (see Laundering Instructions).
2. Sterilized in an autoclave.
3. Washed by hand using the following instructions: Scrub with a deck brush(as needed), using a detergent with a neutral pH; rinse with a hose or pressure washer.

Hang to dry. Always make sure the mat is dry before placing it back in service.

The formula below does not require extensive mechanical action or drying.
The formula is designed to dissolve grease residue by using hot water to emulsify oils and grease.

1. Flush 2-3 minutes, high water level, cold water
2. Break 5-10 minutes, high water level, 120˚ F (49˚ C)
3. Rinse 2 minutes, high water level, cold water
4. Rinse 2 minutes, high water level, cold water
5. Drain 2 minutes

Wet Step mats do not require extracting or drying. Lay mats flat following removal from the washer. Allow cooling before rolling.