Classic Solutions Mat

Fabric

• YARN: 100% ECONYL® regenerated BCF polyamide, twisted & heat set multifilament
• CARPET WEIGHT: 722 g/m²

Backing

• RUBBER BACKING: 100% nitrile rubber with 34% post-industrial recycled content in the polymer - phthalate free - For maximum oil resistance, durability, and performance. Compression-molded with reinforced borders on all four sides.
• THICKNESS: 1.4 mm

Border

• BORDER THICKNESS: 2.5 mm
• BORDER WIDTH: 2 cm

Other Properties

• PILE THICKNESS: 10 mm
• TOTAL WEIGHT: 2.335 g/m²
• STATIC CONTROL: Antistatic behaviour: Approx 1011 ohms (ISO 10965) - Personal Charging: 2kV antistatic (ISO6356)

Safety

• FLAMMABILITY: Cfl-s1

Classic Solutions mats can be cleaned in several different ways:

1. They can be commercially laundered (see Laundering Instructions)
2. Vacuumed regularly (daily in high-traffic areas; weekly in lower-traffic applications)
3. Cleaned with an extractor and laid flat to dry

Hang to dry. Mats should always be dry before they are placed back in service and cooled before rolling.

1. Flush, 2-3 Min. on a medium water level with a maximum temperature of 49°C
2. Flush (optional), 2-3 Min. on a medium water level with a maximum temperature of 49 °C
3. Break, 2-3 Min. on a high water level with a maximum temperature of 49 °C
4. Rinse, 2 Min. on a high water level with cold temperature
5. Rinse, 2 Min. on a high water level with cold temperature
6. Extract on low speed, 1-2 Min.
7. Shakeout with the drum turning, 1 Min.
8. Extract, on a maximum of 250G, 3-5 Min.
9. Dry (optional), 5-10 Min. with a maximum basket temperature of 82 °C
10. Cooldown, 5 Min.

Additional Recommendations:

• All Solution Dyed Mats can be washed together.
• For Heavy Soiled Mats, increase the temperature up to max. 71 °C
• The wash or rinse baths should have a pH between 6 and 9.5; use low pH non-ionic detergents.
• Do not overdry mats; Basket-temperature of the dryer should not exceed 82 °C
• If mats are not dried, the final rinse can be increased to 49 °C. This will reduce moisture retention following extraction
• Lay mats flat following removal from washer; allow mats to cool before rolling