Colorstar HD Logo Mat

• YARN: Continuous filament PET yarn with 100% post-consumer recycled content
  
• YARN WEIGHT: 935 gr/m²
• PILE THICKNESS: 7 mm
• STATIC CONTROL: ISO 6356 (2012) Determination of the static electrical propensity – walking test: -0.3 kVolts. Satisfies IBM test requirements. 
• TOTAL WEIGHT: 2935 g/m²
• PRIMARY BACKING: 100% recycled PET non-woven
• RUBBER BACKING: 100% nitrile rubber for maximum oil resistance, durability, and performance. There is 34% post industrial recycled content in the polymer. 
• BORDER THICKNESS: 2.5mm
• BODY THICKNESS: 1.4mm
• BORDER WIDTH: 2cm
• SIZE VARIANCE: +/- 2%
• FLAMMABILITY: Passes BS 4790 (1987) determination of the flammability of textile floorcoverings: Low radius of effects of ignition.

Colorstar HD washing instructions:

1. Flush, 2-3 Min. on a medium water level with a maximum temperature of 49°C 
2. Flush (optional), 2-3 Min. on a medium water level with a maximum temperature of 49 °C
3. Break, 2-3 Min. on a high water level with a maximum temperature of 49 °C
4. Rinse, 2 Min. on a high water level with cold temperature
5. Rinse, 2 Min. on a high water level with cold temperature
6. Extract on low speed, 1-2 Min.
7. Shake out with the drum turning, 1 Min.
8. Extract, on a maximum of 250G, 3-5 Min.
9. Dry (optional), 5-10 Min. with a maximum basket temperature of 82 °C
10. Cool down, 5 Min.

Additional Recommendations:

• For Heavy Soiled Mats, increase temperature up to max. 60°C.
• Break should not exceed pH of 9,5; use low pH non-ionic detergents.
• Do not overdry mats; Basket-temperature of dryer should not exceed 82 °C.
• If mats are not dried, final rinse can be increased to 49 °C. This will reduce moisture retention following extraction.
• Lay mats flat following removal from washer; allow mats to cool before rolling