Classic Brush Mat

• YARN: Rhodia Solution Dyed Nylon, Type 6,6; Continuous Filament, Type 6 Nylon.
• YARN WEIGHT: 895 gr/m²
• PILE THICKNESS: 10mm
• TOTAL WEIGHT: 2,16 kg/m²
• PRIMARY BACKING: 100% recycled PET non-woven
• RUBBER BACKING: 100% nitrile rubber for maximum oil resistance, durability, and performance. Compression-molded with reinforced borders on all four sides. There is 34% post industrial recycled content in the polymer. 
• BORDER THICKNESS: 2.5mm
• BODY THICKNESS: 1.5mm
• BORDER WIDTH: 2cm
• SIZE VARIANCE: +/- 2%  

Classic Brush mats can be cleaned in several different ways.

1. Commercially laundered (see Laundering Instructions)
2. Vacuumed regularly: daily in high-traffic areas, weekly in lower-traffic applications
3. Cleaned with an extractor and laid flat to dry.

Mats should always be dry before they are placed back in service and cooled before rolling.

1. Flush, 2-3 Min. on a medium water level with a maximum temperature of 49 °C
2. Flush (optional), 2-3 Min. on a medium water level with a maximum temperature of 49 °C
3. Break, 2-3 Min. on a high water level with a maximum temperature of 49 °C
4. Rinse, 2 Min. on a high water level with cold temperature
5. Rinse, 2 Min. on a high water level with cold temperature
6. Extract on low speed, 1-2 Min.
7. Shake out (rotate the wheel at wash speed with the drain open), 1 Min.
8. Extract on low speed, 3-5 Min.
9. Dry, 5-10 Min. with a maximum basket temperature of 82 °C
10. Cooldown, 5 Min.

Additional Recommendations:

• For Heavy Soiled Mats, increase the temperature up to max. 60°C. 
• The wash or rinse baths should have a pH between 6 and 9.5; use low pH non-ionic detergents.
• Do not over-dry mats; Basket-temperature of the dryer should not exceed 82 °C.
• If mats are not dried, the final rinse can be increased to 60 °C. This will reduce moisture retention following extraction.
• Lay mats flat following removal from washer; allow mats to cool before rolling.