StepWell™ OptiBrush Mat

• Yarn Coarse Continuous MonoFilament Solution Dyed Nylon Weight 1300 gr/m²
• PileThickness 11 mm
• Total Weight 5,2 kg/m²
• Primary Backing Freudenberg LUTRADUR™ Polyester Spun Bound Non-Woven Fabric 120 gr/m²
• Rubber 100% Nitrile rubber for maximum oil resistance, weight reduction and flexibility.
• Waterdam Border Thickness: 7,9 mm
• Body Thickness: 2,9 mm
• Border Width: 1,5 cm
• Size Variance of +/-2%

Optibrush mats can be cleaned in several different ways.

1. They can be commercially laundered (see Laundering Instructions)
2. Vacuumed regularly (daily in high-traffic areas; weekly in lower-traffic applications)
3. Cleaned with an extractor, or hosed off as necessary to remove heavy soil.

Hang to dry.Mats should always be dry before they are placed back in service.

1. Flush, 2-3 Min. on a medium water level with a maximum temperature of 49°C
2. Flush (optional), 2-3 Min. on a medium water level with a maximum temperature of 49 °C
3. Break, 2-3 Min. on a high water level with a maximum temperature of 49 °C
4. Rinse, 2 Min. on a high water level with cold temperature
5. Rinse, 2 Min. on a high water level with cold temperature
6. Extract on low speed, 1-2 Min.
7. Shake out with the drum turning, 1 Min.
8. Extract, on a maximum of 250G, 3-5 Min.
9. Dry (optional), 5-10 Min. with a maximum basket temperature of 82 °C
10. Cool down, 5 Min.

Additional Recommendations:

• It’s recommended that Optibrush mats are washed separately from other mats.
• The mats can be washed together with other SDN mats.
• For Heavy Soiled Mats, increase the temperature up to max. 71°C.
• Break should not exceed pH of 9,5; use low pH non-ionic detergents.
• Do not overdry mats; Basket-temperature of the dryer should not exceed 82°C.
• If mats are not dried, the final rinse can be increased to 49°C.
• This will reduce moisture retention following extraction.
• Lay Mats flat following removal from washer; allow mats to cool before rolling.