MicroLuxx™ Mat

• YARN: 50% Continuous Filament Solution Dyed Nylon and 50% recycled Type 6 Nylon MicroLuxx Solution Dyed Nylon.
• YARN WEIGHT: 1112 gr/m².
• PILE THICKNESS: 12mm.
• STATIC CONTROL: Rated at less than 1KV on AATCC134 electrostatic propensity test. Satisfies IBM test requirements.
• TOTAL WEIGHT: 3,112 kg/m².
• PRIMARY BACKING: Freudenberg Polyester Spunbound Non-woven Fabric 130 gr/m².
• RUBBER BACKING: 100% Nitrile EXS rubber for maximum oil resistance, weight reduction, and flexibility. Compression-molded with reinforced borders on all four sides.
• BORDER THICKNESS: 2.5mm
• BODY THICKNESS: 1.5mm
• BORDER WIDTH: 2cm
• SIZE VARIANCE: +/- 2%
• FLAMMABILITY: EN13501-1(2019) Fire Certificate

MicroLuxx mats can be cleaned in several different ways.

1. They can be commercially laundered (see Laundering Instructions)
2. Vacuumed regularly (daily in high-traffic areas; weekly in lower-traffic applications),
3. Cleaned with an extractor and laid flat to dry.

Mats should always be dry before they are placed back in service, and cooled before rolling.

1. Flush, 2-3 Min. on a medium water level with a maximum temperature of 49°C
2. Flush (optional), 2-3 Min. on a medium water level with a maximum temperature of 49 °C
3. Break, 2-3 Min. on a high water level with a maximum temperature of 49 °C
4. Rinse, 2 Min. on a high water level with cold temperature
5. Rinse, 2 Min. on a high water level with cold temperature
6. Extract on low speed, 1-2 Min.
7. Shakeout with the drum turning, 1 Min.
8. Extract, on a maximum of 250G, 3-5 Min.
9. Dry (optional), 5-10 Min. with a maximum basket temperature of 82 °C
10. Cooldown, 5 Min.

Additional Recommendations:

• All Solution Dyed Mats can be washed together.
• For Heavy Soiled Mats, increase the temperature up to max. 71 °C
• The break should not exceed pH of 9,5; use low pH non-ionic detergents
• Do not overdry mats; Basket-temperature of the dryer should not exceed 82 °C
• If mats are not dried, the final rinse can be increased to 49 °C. This will reduce moisture retention following extraction
• Lay mats flat following removal from washer; allow mats to cool before rolling