Classic Microluxx Entrance Mat

• COLORS AVAILABLE: Stardust Grey, Storm Granite, Ocean Blue
• YARN: 100% regenerated post-consumer Econyl®
• YARN WEIGHT: 1112 gr/m²
• PILE HEIGHT: 12mm
• STATIC CONTROL: Rated at less than 1KV on AATCC134 electrostatic propensity test. Satisfies IBM test requirements.
• TOTAL WEIGHT: 3,112 kg/m²
• PRIMARY BACKING: 100% recycled PET non-woven
• RUBBER BACKING: 100% nitrile rubber for maximum oil resistance, durability, and performance.  Compression-molded with reinforced borders on all four sides. There is up to 34% post industrial recycled content in the polymer. 
• BORDER THICKNESS: 2.5 mm
• BODY THICKNESS: 1.4 mm
• BORDER WIDTH: 2 cm
• SIZE VARIANCE: +/- 2%
• FLAMMABILITY: EN13501-1 (2019) Fire Certificate

Classic Microluxx mats can be cleaned in several different ways.

1. They can be commercially laundered (see Laundering Instructions)
2. Vacuumed regularly (daily in high-traffic areas; weekly in lower-traffic applications),
3. Cleaned with an extractor and laid flat to dry.

Mats should always be dry before they are placed back in service, and cooled before rolling.

1. Flush, 2-3 Min. on a medium water level with a maximum temperature of 49°C
2. Flush (optional), 2-3 Min. on a medium water level with a maximum temperature of 49 °C
3. Break, 2-3 Min. on a high water level with a maximum temperature of 49 °C
4. Rinse, 2 Min. on a high water level with cold temperature
5. Rinse, 2 Min. on a high water level with cold temperature
6. Extract on low speed, 1-2 Min.
7. Shakeout with the drum turning, 1 Min.
8. Extract, on a maximum of 250G, 3-5 Min.
9. Dry (optional), 5-10 Min. with a maximum basket temperature of 82 °C
10. Cooldown, 5 Min.

Additional Recommendations:

• All Solution Dyed Mats can be washed together.
• For Heavy Soiled Mats, increase the temperature up to max. 71 °C
• The wash or rinse baths should have a pH between 6 and 9.5; use low pH non-ionic detergents.
• Do not overdry mats; Basket-temperature of the dryer should not exceed 82 °C
• If mats are not dried, the final rinse can be increased to 49 °C. This will reduce moisture retention following extraction
• Lay mats flat following removal from washer; allow mats to cool before rolling