To order this product you must be logged into your distributor account. Not yet a Mountville distributor, but interested in becoming one? Fill out this form.
Message Mats
- HIGH-QUALITY PRINT | The Message designs are digitally printed; fine details, shading, and 3D images can be achieved;
- 66 standard color options available Incredible stain resistance: no cross staining, easy to clean.
- Yarn contains 100% post-consumer recycled content.
- Produced within 24-48 hours.


Recommended for indoor commercial use at entryways, in lobbies, at front desks or anywhere you want to display a message to customers/visitors or employees.
- YARN: Continuous filament PET yarn with 100% post-consumer recycled content.
- YARN WEIGHT: 900 gr/m².
- PILE THICKNESS: 11mm.
- STATIC CONTROL: ISO 6356 (2012) Determination of the static electrical propensity - walking test: -0.3 kVolts. Satisfies IBM test requirements.
- TOTAL WEIGHT: 2.90 kg/m².
- PRIMARY BACKING: Freudenberg LUTRADUR? Polyester Spun bound Non-woven Fabric 130gr/m².
- RUBBER BACKING: 100% Nitrile EXS™ rubber for maximum oil resistance, weight reduction and flexibility. Compression-molded with reinforced borders on all four sides.
- BORDER THICKNESS: 2.5mm
- BODY THICKNESS: 1.5mm
- BORDER WIDTH: 2cm
- SIZE VARIANCE: +/- 2%
- FLAMMABILITY: Passes BS 4790 (1987) determination of the flammability of textile floor coverings: Low radius of effects of ignition.
Message mats can be cleaned in several different ways.
- They can be commercially laundered (see Laundering Instructions)
- Vacuumed regularly (daily in high-traffic areas; weekly in lower-traffic applications)
- Cleaned with an extractor, or hosed off as necessary to remove heavy soil.
Hang to dry.Mats should always be dry before they are placed back in service.
- Flush, 2-3 Min. on a medium water level with a maximum temperature of 49°C
- Flush (optional), 2-3 Min. on a medium water level with a maximum temperature of 49 °C
- Break, 2-3 Min. on a high water level with a maximum temperature of 49 °C
- Rinse, 2 Min. on a high water level with cold temperature
- Rinse, 2 Min. on a high water level with cold temperature
- Extract on low speed, 1-2 Min.
- Shake out with the drum turning, 1 Min.
- Extract, on a maximum of 250G, 3-5 Min.
- Dry (optional), 5-10 Min. with a maximum basket temperature of 82 °C
- Cool down, 5 Min.
Additional Recommendations:
- For Heavy Soiled Mats, increase temperature up to max. 60°C.
- Break should not exceed pH of 9,5; use low pH non-ionic detergents.
- Do not overdry mats; Basket-temperature of dryer should not exceed 82 °C.
- If mats are not dried, final rinse can be increased to 49 °C. This will reduce moisture retention following extraction.
- Lay mats flat following removal from washer; allow mats to cool before rolling.