To order this product you must be logged into your distributor account. Not yet a Mountville distributor, but interested in becoming one? Fill out this form.

View Product Content Hub

OptiBrush Bartex Mat

Product Number: 7418 (1-Colour); 7446 (1-Colour No Border); 7424 (2-3 Colours); 7449 (2-3 Colours No Border)
Optibrush mats feature your custom logo or artwork on durable nylon monofibers. Combine maximum of 2 colours for the artwork.
  • Durable Nylon Brush mono fibers make for excellent scraping action.
  • Solution Dyed fibers for 100% UV-resistance.Bleach and chemical resistant.
  • Optional drainage holes allow for excellent drainage.

Recommended for indoor and outdoor commercial use at entryways, in lobbies, at front desks or anywhere you want to display your company logo, slogan, artwork, or message to customers/visitors or employees. Excellent for scraping action.

60 x 85 cm

75 x 85 cm

80 x 120 cm

85 x 150 cm

85 x 300 cm

120 x 180 cm

120 x 200 cm

150 x 200 cm

150 x 300 cm

Special sizes available.

Maximum size: 200 x 1000 cm

  • YARN: Coarse Continuous filament Solution Dyed Nylon.
  • YARN WEIGHT: 1,300 g/m².
  • TOTAL WEIGHT: 5,20 kg/m².
  • PRIMARY BACKING: Polyester Spun bound Non-woven Fabric 120g/m².
  • RUBBER BACKING: 100% Nitrile EXS™ rubber with high UV resistance and high resistance to carbon bleeding. Compression-molded with claw backing for excellent dimensional stability.
  • BORDER WIDTH: 1.5cm
  • SIZE VARIANCE: +/- 2%

Optibrush mats can be cleaned in several different ways.

  1. They can be commercially laundered (see Laundering Instructions)
  2. Vacuumed regularly (daily in high-traffic areas; weekly in lower-traffic applications)
  3. Cleaned with an extractor, or hosed off as necessary to remove heavy soil.

Hang to dry.Mats should always be dry before they are placed back in service.

  1. Flush, 2-3 Min. on a medium water level with a maximum temperature of 49°C
  2. Flush (optional), 2-3 Min. on a medium water level with a maximum temperature of 49 °C
  3. Break, 2-3 Min. on a high water level with a maximum temperature of 49 °C
  4. Rinse, 2 Min. on a high water level with cold temperature
  5. Rinse, 2 Min. on a high water level with cold temperature
  6. Extract on low speed, 1-2 Min.
  7. Shake out with the drum turning, 1 Min.
  8. Extract, on a maximum of 250G, 3-5 Min.
  9. Dry (optional), 5-10 Min. with a maximum basket temperature of 82 °C
  10. Cool down, 5 Min.

Additional Recommendations:

  • It's recommended that Optibrush mats are washed separate from other mats.
  • Optigraphic & Diplomats can be washed together with other SDN mats.
  • For Heavy Soiled Mats, increase temperature up to max. 71°C.
  • Break should not exceed pH of 9,5; use low pH non-ionic detergents.
  • Do not overdry mats; Basket-temperature of dryer should not exceed 82°C.
  • If mats are not dried, final rinse can be increased to 49°C. This will reduce moisture retention following extraction.
  • Lay Mats flat following removal from washer; allow mats to cool before rolling.