Home > Catalog

To order this product you must be logged into your distributor account. Not yet a Mountville distributor, but interested in becoming one? Fill out this form.

Download Brochure Order Product

View Product Content Hub

Classic Brush Mat

Product Number 4584
Classic Brush mats feature extra-coarse nylon fibers blended with traditional nylon carpet fibers. This duo of fibers is designed to create excellent scraping and wiping action for maximum soil-stopping power.
  • Superior Dirt-Stopping Power - Coarse nylon fibers scrape and wipe dust and dirt from shoes
  • Resilient - High-twist, heat-set nylon resists crushing to better trap dirt and extends the useful life of the mat
  • Fade Resistant - Solution-dyed nylon won't fade in sunlight or with repeated washing; impervious to bleach
  • Commercially launderable
  • Available in 1 color on durable nitrile rubber with multiple backing options (smooth or claw) to ensure the mat stays in place on your floor

Recommended for indoor use at entryways where more aggressive scraping/wiping action is desired to remove dirt, sand, and moisture from shoes to prevent tracking.

60 x 85 cm

75 x 85 cm

85 x 115 cm

85 x 150 cm

85 x 300 cm

115 x 180 cm

115 x 200 cm

115 x 240 cm

115 x 250 cm

115 x 300 cm

150 x 200 cm

150 x 240 cm

150 x 250 cm

150 x 300 cm

Special sizes available.

Maximum length up to 550 cm.

  • YARN: Rhodia Solution Dyed Nylon, Type 6,6; Continuous Filament, Type 6 Nylon.
  • YARN WEIGHT: 895 gr/m².
  • PILE THICKNESS: 10mm.
  • TOTAL WEIGHT: 3,0 kg/m².
  • PRIMARY BACKING: Freudenberg Polyester Spunbound Non-woven Fabric 130 gr/m².
  • RUBBER BACKING: 100% Nitrile EXS rubber for maximum oil resistance, weight reduction, and flexibility. Compression-molded with reinforced borders on all four sides.
  • BORDER THICKNESS: 2.5mm
  • BODY THICKNESS: 1.5mm
  • BORDER WIDTH: 2cm
  • SIZE VARIANCE: +/- 2%

Classic Brush mats can be cleaned in several different ways.

  1. Commercially laundered (see Laundering Instructions)
  2. Vacuumed regularly: daily in high-traffic areas, weekly in lower-traffic applications
  3. Cleaned with an extractor and laid flat to dry.

Mats should always be dry before they are placed back in service and cooled before rolling.

Classic Brush Mats that are backed with nitrile rubber can be commercially laundered. Proper laundering will prolong the life of the mat by preventing the buildup of soil and soap residue.

For heavy soil, increase the temperature to a max of 140 degrees F (60 degrees C). The break should not exceed a pH of 9.5; use low pH non-ionic detergents.

  1. Flush 2-3 minutes, medium water level, 120 degrees F (49 degrees C)
  2. Flush (optional) 2-3 minutes, medium water level, 120 degrees F (49 degrees C)
  3. Break 2-3 minutes, high water level, 120 degrees F (49 degrees C)
  4. Rinse 2 minutes, high water level, cold
  5. Rinse 2 minutes, high water level, cold
  6. Extract (low speed) 1-2 minutes
  7. Shake out (rotate the wheel at wash speed with the drain open) 1 minute
  8. Extract (low speed) 3-5 minutes
  9. Dry 5-10 minutes, 180 degrees F (82 degrees C) basket temp.
  10. Cool down 5 minutes

Lay mats flat following removal from washer or dryer. Allow cooling before rolling.Do not over-dry mats; the basket temperature of the dryer should not exceed 180 degrees F (82 degrees C).

If mats are not dried, the final rinse can be increased to 140 degrees F (60 degrees C). This will reduce moisture retention following extraction.