Classic Solutions Mat

• YARN: Continuous Filament Solution Dyed Nylon, Type 6 Nylon.
• TWIST: Each strand of yarn contains two plies of fiber that have been twisted individually 5.5 turns per 2.5cm and then twisted together at 4.5 turns per 2.5cm. The yarn is then heat set to permanently maintain the hard twist.
• YARN WEIGHT: 820gr/m².
• PILE THICKNESS: 10mm.
• STATIC CONTROL: Rated at less than 1KV on AATCC134 electrostatic propensity test. Satisfies IBM test requirements.
• TOTAL WEIGHT: 2.82 kg/m².
• PRIMAIRE RUG: 100% gerecycled PET-vlies
• RUBBERBAND: 100% nitrilrubber voor maximale oliebestendigheid, duurzaamheid en prestaties. Het polymeer bevat 34% postindustrieel gerecycled materiaal. 
• BORDER THICKNESS: 2.5mm
• BODY THICKNESS: 1.5mm
• BORDER WIDTH: 2cm
• SIZE VARIANCE: +/- 2%
• FLAMMABILITY: Passes standards for EN ISO 9239-1 (2010)

Classic Solutions mats can be cleaned in several different ways.

1. Commercially laundered (see Laundering Instructions)
2. Vacuumed regularly: daily in high-traffic areas, weekly in lower-traffic applications
3. Cleaned with an extractor and laid flat to dry

Mats should always be dry before they are placed back in service and cooled before rolling.

1. Flush, 2-3 Min. on a medium water level with a maximum temperature of 49°C
2. Flush (optional), 2-3 Min. on a medium water level with a maximum temperature of 49 °C
3. Break, 2-3 Min. on a high water level with a maximum temperature of 49 °C
4. Rinse, 2 Min. on a high water level with cold temperature
5. Rinse, 2 Min. on a high water level with cold temperature
6. Extract on low speed, 1-2 Min.
7. Shakeout with the drum turning, 1 Min.
8. Extract, on a maximum of 250G, 3-5 Min.
9. Dry (optional), 5-10 Min. with a maximum basket temperature of 82 °C
10. Cooldown, 5 Min.

Additional Recommendations:

• All Solution Dyed Mats can be washed together.
• For Heavy Soiled Mats, increase the temperature up to max. 71 °C
• The break should not exceed pH of 9,5; use low pH non-ionic detergents
• Do not overdry mats; Basket-temperature of the dryer should not exceed 82 °C
• If mats are not dried, the final rinse can be increased to 49 °C. This will reduce moisture retention following extraction
• Lay mats flat following removal from washer; allow mats to cool before rolling