To order this product you must be logged into your distributor account. Not yet a Mountville distributor, but interested in becoming one? Fill out this form.

View Product Content Hub

Classic Solutions Mat

Product Number 453
Classic Solutions mats feature a slip-resistant rubber backing and a solution-dyed carpet surface designed to stop dust, dirt, and moisture at your door and provide a safe walking surface.
  • Solution-dyed nylon fibers provide superior color and wash fastness.
  • LUTRADUR primary substrate will not fray, reduces linting, and provides a strong bond between the rubber and the carpet.
  • High Twist heat-set nylon fibers are resistant to crushing and allow dirt to filter into the mat rather than remaining on top of the carpeted surface.
  • Bleach / UV resistant.
  • Mats are available in Anthracite, Black Mink, Blue, Blue Steel, Brown, Grey, Red, Slate Grey, Clear Granite, Clear Black, Clear Red.

Recommended for indoor commercial use at entryways, in lobbies, at front desks or anywhere additional traction or moisture control is needed.

?60 x 85 cm

75 x 85 cm

85 x 115 cm

85 x 150 cm

85 x 300 cm

115 x 180 cm

115 x 200 cm

115 x 240 cm

115 x 250 cm

115 x 300 cm

150 x 200 cm

150 x 240 cm

150 x 250 cm

150 x 300 cm

200 x 200 cm

200 x 300 cm

Special sizes available.

Maximum size 200 x 550 cm

  • YARN: Continuous Filament Solution Dyed Nylon, Type 6 Nylon.
  • TWIST: Each strand of yarn contains two plies of fiber that have been twisted individually 5.5 turns per 2.5cm and then twisted together at 4.5 turns per 2.5cm. The yarn is then heat set to permanently maintain the hard twist.
  • YARN WEIGHT: 820gr/m².
  • STATIC CONTROL: Rated at less than 1KV on AATCC134 electrostatic propensity test. Satisfies IBM test requirements.
  • TOTAL WEIGHT: 2.82 kg/m².
  • PRIMARY BACKING: Freudenberg LUTRADUR Polyester Spun bound Non-woven Fabric 130gr/m².
  • RUBBER BACKING: 100% Nitrile rubber for maximum oil resistance, weight reduction, and flexibility. Compression-molded with reinforced borders on all four sides.
  • SIZE VARIANCE: +/- 2%
  • FLAMMABILITY: Passes standards for EN ISO 9239-1 (2010)

Classic Solutions mats can be cleaned in several different ways.

  1. Commercially laundered (see Laundering Instructions)
  2. Vacuumed regularly: daily in high-traffic areas, weekly in lower-traffic applications
  3. Cleaned with an extractor and laid flat to dry

Mats should always be dry before they are placed back in service and cooled before rolling.

  1. Flush, 2-3 Min. on a medium water level with a maximum temperature of 49°C
  2. Flush (optional), 2-3 Min. on a medium water level with a maximum temperature of 49 °C
  3. Break, 2-3 Min. on a high water level with a maximum temperature of 49 °C
  4. Rinse, 2 Min. on a high water level with cold temperature
  5. Rinse, 2 Min. on a high water level with cold temperature
  6. Extract on low speed, 1-2 Min.
  7. Shakeout with the drum turning, 1 Min.
  8. Extract, on a maximum of 250G, 3-5 Min.
  9. Dry (optional), 5-10 Min. with a maximum basket temperature of 82 °C
  10. Cooldown, 5 Min.

Additional Recommendations:

  • All Solution Dyed Mats can be washed together.
  • For Heavy Soiled Mats, increase the temperature up to max. 71 °C
  • The break should not exceed pH of 9,5; use low pH non-ionic detergents
  • Do not overdry mats; Basket-temperature of the dryer should not exceed 82 °C
  • If mats are not dried, the final rinse can be increased to 49 °C. This will reduce moisture retention following extraction
  • Lay mats flat following removal from washer; allow mats to cool before rolling